European and Chinese commercial vehicle clutch applications cover a wide range of truck platforms, transmissions and operating duties. Mercedes-Benz, MAN, Volvo, Scania, DAF, IVECO and Renault Trucks appear alongside FAW, Sinotruk HOWO, SHACMAN, Foton and Dongfeng in international aftermarket sourcing.
The correct clutch is not selected by region or brand name alone. Buyers should use the vehicle family to start the search, then verify the OE reference, clutch diameter, spline, hub profile, transmission and complete system configuration.

European truck clutch applications
CHUANGJIN publishes application records for Mercedes-Benz, MAN, Volvo, Scania, DAF, IVECO and Renault Trucks. These records connect vehicle-family searches with clutch product references, but they are identification resources rather than blanket fitment guarantees.
Mercedes-Benz
The CHUANGJIN Mercedes-Benz records include 430mm references such as 1878 634 027 clutch disc and 3482 081 232 pressure plate. A buyer should compare the disc and cover, confirm the transmission, and check the hub and release configuration before treating the parts as a matched application.
Volvo, MAN, Scania, DAF, IVECO and Renault Trucks
For other European applications, send the truck model, engine, transmission, production period, OE reference and clutch dimensions. European truck families can include different clutch platforms under similar model names. The supplier should be able to show which reference, product type and dimensions support the proposed match.
Chinese truck clutch applications
CHUANGJIN also organizes application references for FAW, Sinotruk HOWO, SHACMAN, Foton and Dongfeng. The same verification process applies: start with the exact part number or product photograph, then compare the physical clutch and vehicle configuration.
FAW
The FAW application page includes a catalogue reference for a clutch disc. Send the reference exactly as shown on the product or packaging, then add the diameter, spline and vehicle transmission details to the inquiry.
SHACMAN and other Chinese truck platforms
The SHACMAN application page includes clutch product records such as SZ916000702 pressure plate. FAW, HOWO, Foton and Dongfeng requests should be handled in the same way: use the vehicle family as a search filter, but confirm the full part and transmission record before ordering.
European and Chinese fitment comparison
| Application group | Useful starting input | Final checks |
|---|---|---|
| European trucks | Brand, model, OE reference and transmission | Diameter, spline, hub profile, pressure plate and release system |
| Chinese trucks | Brand, catalogue reference, model and application | Physical dimensions, transmission, complete clutch configuration and packaging |
| Both groups | Clear front, back and side photographs | Confirm the actual product record before quotation and repeat purchasing. |
Why diameter alone is not enough
A 430mm disc can have a different spline count, spline outside diameter, hub height, damper layout or lining dimension from another 430mm disc. A pressure plate with the same nominal diameter can also differ in mounting pattern, cover height and release behavior.
For this reason, provide the measured clutch record together with the brand and OE number. The truck clutch disc measurement guide explains how to record the dimensions that distinguish similar products.
Application verification workflow
- Identify the vehicle family and transmission.
- Record every OE or cross-reference number.
- Confirm the component type: disc, pressure plate or complete kit.
- Measure diameter, spline, hub profile and relevant mounting dimensions.
- Compare the product record with the actual part photographs.
- Confirm quantity, packaging, destination and private-label requirements.
Common application-sourcing mistakes
- Assuming a part fits every model in a brand family.
- Using an application page without checking the transmission.
- Mixing European or Chinese clutch components from different reference families.
- Quoting a complete kit when only a disc or pressure plate was verified.
- Ignoring the difference between product reference and vehicle-level fitment.
Frequently asked questions
Can one clutch part fit several European truck brands?
A cross-reference may be shared across applications, but the complete physical and transmission information should still be checked. Do not treat a shared diameter or similar product photograph as final proof.
How should I source a Chinese truck clutch for export?
Send the exact catalogue or OE reference, product type, vehicle and transmission information, dimensions, photographs, required quantity and destination market. Ask the supplier to confirm the product record before discussing repeat supply.
Final checklist
For European and Chinese trucks, use the application page to narrow the search, then verify the actual reference and physical profile. A reliable request includes the brand, model, engine, transmission, OE number, diameter, spline, hub dimensions, photos, quantity and destination country.
Review the CHUANGJIN applications center and send the complete information through the contact page.
Vehicle manufacturers, brand names and part numbers are used for identification and compatibility reference only. Final fitment should be confirmed against the complete vehicle and clutch system.