Japanese commercial vehicle clutch sourcing often begins with a familiar truck brand, but brand name alone does not identify the complete clutch configuration. Hino, Isuzu, Mitsubishi Fuso and UD Trucks can use different clutch discs, pressure plates and release systems depending on the model, engine, transmission, production period and market.
For importers, distributors and repair networks, the most reliable method is to combine the vehicle family with the OE reference, clutch dimensions, spline profile, transmission and clear product photographs.

Why Japanese truck applications need reference-led matching
Commercial vehicle model names can cover more than one drivetrain configuration. A clutch selected only by the truck badge or nominal diameter may have the wrong spline, hub height, pressure-plate mounting pattern or release direction.
Start with the information printed or stamped on the old part, then confirm the physical profile and application. If the part number is missing, record the diameter, spline, hub and transmission details before requesting a quote.
Hino clutch sourcing
CHUANGJIN publishes Hino application records by reference and dimensions. One example is the HNC541 380mm clutch pressure plate, listed for Hino application identification.
The HNC541 record is a useful starting point, not a blanket statement that the part fits every Hino truck. Confirm the vehicle configuration, transmission, clutch diameter, pressure-plate profile and related disc before ordering. The same approach applies to other Hino references in the CHUANGJIN application catalogue.
Isuzu clutch sourcing
For an Isuzu request, send the truck model, engine and transmission together with every visible number on the disc and pressure plate. Include front, rear and side photographs, especially if the old part has a worn or damaged label.
Important physical checks include the outside diameter, lining dimensions, spline tooth count, spline outside diameter, hub projection, damper arrangement and pressure-plate mounting interface. An Isuzu vehicle family can contain different clutch platforms, so the physical record is essential.
Mitsubishi Fuso clutch sourcing
Mitsubishi Fuso clutch matching should also begin with the complete reference and transmission information. For a replacement disc, measure the friction surface and spline. For a pressure plate, record the mounting pattern, cover height and release configuration.
If the request is for a complete kit, send the disc and pressure-plate references together. State whether the release component is required and whether the vehicle has been modified or converted.
UD Trucks clutch sourcing
UD Trucks applications should be confirmed using the same complete-input process. Include the truck model, engine, transmission, vehicle year if known, operating duty and destination market. Heavy-duty, vocational and bus-related applications may require different clutch configurations.
If the original clutch is available, photograph the hub and spline from both sides. If only the vehicle is available, send the transmission reference and any service or parts documentation that identifies the original clutch.
Japanese truck clutch RFQ checklist
| Input | What to provide |
|---|---|
| Vehicle | Hino, Isuzu, Mitsubishi Fuso or UD Trucks model and production information. |
| Drivetrain | Engine and transmission model or reference. |
| Part reference | OE, cross-reference, stamped number or packaging label. |
| Measurements | Diameter, friction dimensions, spline and hub profile. |
| Photos | Front, back, side, hub, spline, pressure-plate cover and markings. |
| Commercial details | Quantity, destination country, packaging and private-label requirements. |
How to use the CHUANGJIN application pages
The CHUANGJIN applications center organizes vehicle-family records for application identification. The records should be used with the OE reference, dimensions, spline and transmission rather than as a universal fitment list.
For a faster request, search the catalogue first, then send the part number, clear photos and required quantity. If the exact record is not shown, the technical team can compare the supplied information with the available product and application records.
Common sourcing mistakes
- Choosing by Japanese truck brand without the transmission reference.
- Assuming all parts with the same diameter share the same spline.
- Sending only one photograph of a worn clutch disc.
- Mixing a pressure plate from one application with a disc from another.
- Leaving out the operating duty, quantity or destination market.
Frequently asked questions
Can I order a Hino clutch by model name only?
The model name helps narrow the search, but final matching should include the OE reference, dimensions, transmission and physical profile. The HNC541 record, for example, is an application reference for a 380mm pressure plate and should be confirmed against the complete vehicle configuration.
What if the original Japanese truck clutch has no readable number?
Send clear photographs and measure the diameter, spline, hub projection and pressure-plate interface. Add the truck model, engine and transmission so the supplier can compare application records.
Final checklist
For Hino, Isuzu, Mitsubishi Fuso and UD Trucks, use the brand as the starting point and the complete reference as the decision record. Confirm the disc, pressure plate and release system against the transmission and measured physical profile before ordering.
Send the complete Japanese truck clutch request through the CHUANGJIN contact page.
Vehicle manufacturers, brand names and part numbers are used for identification and compatibility reference only. CHUANGJIN products are independent aftermarket replacement parts unless otherwise stated.